Theory and Concept
›
The area enclosed by an ellipse can be calculated using definite integration. Since the ellipse is symmetric about both the coordinate axes, its total area is four times the area of the first-quadrant region.
The standard equation of an ellipse is
Comparing the given equation with the standard form, we obtain \(a=4\) and \(b=3\). Thus, the ellipse extends from \(x=-4\) to \(x=4\) and from \(y=-3\) to \(y=3\).
Step-by-step Plan
›
We will express \(y\) in terms of \(x\), calculate the area of the first-quadrant region using definite integration, and multiply the result by four to obtain the total enclosed area.
Complete Solution
›
- Express \(y\) in terms of \(x\)
- From the equation of the ellipse,\[ \frac{x^2}{16}+\frac{y^2}{9}=1 \]\[ \frac{y^2}{9}=1-\frac{x^2}{16} \]\[ y^2=9\left(1-\frac{x^2}{16}\right) \]\[ y=3\sqrt{1-\frac{x^2}{16}} \]We take the positive square root because we are considering the upper half of the ellipse in the first quadrant.
- Set up the definite integral
- By symmetry, the total area \(A\) enclosed by the ellipse is four times the area in the first quadrant. Therefore,\[ A=4\int\limits_0^4 y\,dx \]\[ =4\int\limits_0^4 3\sqrt{1-\frac{x^2}{16}}\,dx \]\[ =12\int\limits_0^4 \frac{\sqrt{16-x^2}}{4}\,dx \]
- Evaluate the integral
-
We use the standard integration formula\[ \int\sqrt{a^2-x^2}\,dx = \frac{x}{2}\sqrt{a^2-x^2} +\frac{a^2}{2}\sin^{-1}\left(\frac{x}{a}\right)+C \]
- Here, \(a=4\). Substituting this formula, we get\[ \begin{aligned} A&=3\int\limits_0^4\sqrt{16-x^2}\,dx\\ &=3\left[ \frac{x}{2}\sqrt{16-x^2} +8\sin^{-1}\left(\frac{x}{4}\right) \right]_0^4 \end{aligned} \]
- Apply the limits
- Substituting the upper and lower limits,\[\begin{aligned}A=3\Bigg[&\left\{\frac{4}{2}\sqrt{16-16}+8\sin^{-1}(1)\right\}\\[5pt] &-\left\{\frac{0}{2}\sqrt{16}+8\sin^{-1}(0)\right\}\Bigg]\end{aligned}\]
- Using the values\[ \sin^{-1}(1)=\frac{\pi}{2}, \qquad \sin^{-1}(0)=0 \]
- we obtain\[ \begin{aligned} A&=3\left[8\left(\frac{\pi}{2}\right)-0\right]\\[5pt] &=3(4\pi)\\[5pt] &=12\pi \end{aligned} \]
Final Answer
›
Common Mistakes
›
When calculating the area of an ellipse using integration, remember that the equation gives both positive and negative values of \(y\). Use the positive square root when integrating over the first quadrant.
Do not forget to multiply the first-quadrant area by four, since the ellipse is symmetric about both coordinate axes.
While applying the standard integration formula, retain the square-root term \(\sqrt{16-x^2}\) in the first term of the antiderivative. Also, always subtract the value at the lower limit from the value at the upper limit.
Finally, remember that \(\sin^{-1}(1)=\frac{\pi}{2}\), not \(\pi\).
Key Takeaways
›
-
The standard equation of an ellipse is \(\frac{x^2}{a^2}+\frac{y^2}{b^2}=1\), where \(a\) and \(b\) represent its semi-major and semi-minor axes, respectively.
-
For an ellipse centred at the origin, symmetry allows us to calculate the area in the first quadrant and multiply it by four.
-
The standard area formula obtained through integration is
-
\[ \boxed{A=\pi ab} \]
-
For the given ellipse, \(a=4\) and \(b=3\), so its area can also be verified directly:
-
\[ A=\pi\times4\times3=12\pi \]
-
Thus, definite integration provides a systematic method of finding the area enclosed by curves and also leads to the standard geometrical area formula for an ellipse.